Sectional flagpole with banner arm and system Click - height 6,40 m
Many people choose to purchase aluminum flag poles because they are affordable, lightweight, and sturdy out in the elements. Aluminum is also intended to last for a very long time. With a quality aluminum pole, you can fly your flag for many years without needing to replace your pole. Most homeowners and business owners prefer purchasing an aluminum flagpole, as it requires virtually no care and maintenance.
![sectional flagpole](https://flagland.com/wp-content/uploads/2022/09/sectional-flagpole-2.png)
Traditional flagpoles use ropes to hold the flag in place.
The rotating arm also helps flags last longer because it puts less stress on them.
- Total length of sectional flagpole is 6,40 m
- Flagpole with rotary extension arm which rotates through 360°
- Silver anodised, cylindrical aluminium tubing (Ø 50 mm)
- Weather resistant, anodised aluminium
- Pole fittings made of high quality plastic
- Complete with all flagpole fixings
- Vertical flag guidance by means of rings on the pole
- Weights prevent the flag from fluttering upwards on the pole, and to make taking the flag down easier
- Ideal for ''event flags''
- Easy to transport due to compact transport length
- A variety of bases are available
- Easy to install and convenient to use
![sectional flagpole](https://flagland.com/wp-content/uploads/2022/09/sectional-flagpole-3.png)
![sectional flagpole](https://flagland.com/wp-content/uploads/2022/09/sectional-flagpole.jpg)
Product images
Sectional flagpole with horizontal rotational arm
Thanks to the rotating arm (not hoistable), the full size of the flag can be seen even when there is no wind. The flag is fixed lengthways by the supplied plastic rings and does not create any noise. The rotating arm, not manipulable from the ground, offers the best possible protection from theft and vandalism. The arm turns freely in the wind a full 360°.
Material | anodized aluminium |
Height | 6,40 m |
Diameters of tubes (4 tubes) | Φ50 x 2 mm |
Horizontal rotational arm 360o | made of anodized aluminium Φ20x1,5 mm the length of the arm is 100cm |
Weight | 4,7 kg |
Optional bases for flagpoles with system Click
![telescopic flagpole base](https://flagland.com/wp-content/uploads/2022/09/telescopic-flagpole-base-1-1024x1024.jpg)
Steel base
Steel base – Type I – Technical specifications : thickness – 10mm, dimensions – 490x490mm, weight – 19,6kg, painted electrostatic colour black
![telescopic flagpole base](https://flagland.com/wp-content/uploads/2022/09/telescopic-flagpole-base-3.jpg)
Flat steel cross base
Flat steel cross base – Type II – Technical specifications : dimensions – 600x600mm, weight – 6kg, with Φ12mm holes for fixing, colour black
![telescopic flagpole base](https://flagland.com/wp-content/uploads/2022/09/telescopic-flagpole-base-2-1024x1024.jpg)
Base for concrete weights
Base for concrete weights – Type III – Technical specifications : width – 100 mm, length – 400 mm, weight – 6 kg, recommended for concrete blocks – 400 x 400 mm, colour black, does not come with concrete blocks
![telescopic flagpole base](https://flagland.com/wp-content/uploads/2022/09/telescopic-flagpole-base-4-1024x1024.jpg)
Peg type base
Peg base – Type IV – Technical specifications : length – 660mm, burial height – 550mm, weight – 2kg, made of galvanized steel
![telescopic flagpole base](https://flagland.com/wp-content/uploads/2022/09/telescopic-flagpole-base-5-1024x1024.jpg)
Rotational screw-in base
Rotational screw-in base – Type V – Technical specifications : length – 660mm, burial height – 550mm, weight – 2kg, made of galvanized steel
![telescopic flagpole base](https://flagland.com/wp-content/uploads/2022/09/telescopic-flagpole-base-6-1024x1024.jpg)
Wheel secured base
Wheel secured base – Type VI – Technical specifications : width – 260mm, length – 560mm, diameter – 33mm, weight – 2.5kg, painted electrostatic colour black