Sectional flagpole with banner arm and system Click - height 4,80 m
Aluminium flagpole with rotary extension arm. Delivered with rings and weight. Weight prevent the flag from fluttering upwards on the pole, and to make taking the flag down easier. Can easily be installed with common tools and materials – professional installation services not needed/required. You can choose one of our base available for your flagpole. Sectional flagpole with extension arm which rotates through 360°.
This sectional flagpole are fitted with horizontal rotory arm that allow flags to display fully even when there is no wind. This gives exposure to your message at all times.
- Sectional flagpole, made of cylindrical aluminium profile Φ50mm
- Flagpole with rotary extension arm which rotates through 360°
- Total length of sectional flagpole is 4,80 m
- The width of the horizontal rotary arm is 100cm
- Complete with all flagpole fixings : 5pcs plastic rings and 1pc weight
- Vertical flag guidance by means of rings on the pole
- Weights prevent the flag from fluttering upwards on the pole, and to make taking the flag down easier
- Pole fittings made of high quality plastic
- Ideal for ''event flags''
- Easy to transport due to compact transport length
- A variety of bases are available
- Easy to install and convenient to use
Product images
Sectional flagpole with horizontal rotational arm
Thanks to the rotating arm (not hoistable), the full size of the flag can be seen even when there is no wind. The flag is fixed lengthways by the supplied plastic rings and does not create any noise. The rotating arm, not manipulable from the ground, offers the best possible protection from theft and vandalism. The arm turns freely in the wind a full 360°.
| Material | anodized aluminium |
| Height | 4,80 m |
| Diameters of tubes (4 tubes) | Φ50 x 2 mm |
| Horizontal rotational arm 360o | made of anodized aluminium Φ20x1,5 mm the length of the arm is 100cm |
| Weight | 3,4 kg |
Optional bases for flagpoles with system Click
Steel base
Steel base – Type I – Technical specifications : thickness – 10mm, dimensions – 490x490mm, weight – 19,6kg, painted electrostatic colour black
Flat steel cross base
Flat steel cross base – Type II – Technical specifications : dimensions – 600x600mm, weight – 6kg, with Φ12mm holes for fixing, colour black
Base for concrete weights
Base for concrete weights – Type III – Technical specifications : width – 100 mm, length – 400 mm, weight – 6 kg, recommended for concrete blocks – 400 x 400 mm, colour black, does not come with concrete blocks
Peg type base
Peg base – Type IV – Technical specifications : length – 660mm, burial height – 550mm, weight – 2kg, made of galvanized steel
Rotational screw-in base
Rotational screw-in base – Type V – Technical specifications : length – 660mm, burial height – 550mm, weight – 2kg, made of galvanized steel
Wheel secured base
Wheel secured base – Type VI – Technical specifications : width – 260mm, length – 560mm, diameter – 33mm, weight – 2.5kg, painted electrostatic colour black
