Inclined flag holder for poles and lampposts - 1 flag
Inclined flagpoles for lampposts or light poles enable you to display your advertising messages in high-traffic areas such as city centers, simply by attaching them to existing poles. These flagpoles are usually attached to street lighting poles in urban or commercial environments, to set up a visual advertising campaign.
Inclined flag holder for 1 flag
Product features
Product code: STP901
- Plate height 150mm
- Plate width 80mm
- Connection tube diameter Φ 28x2mm
- Recommended mast size Φ 22mm
- Recommended flag size 700 x 1000mm
- Material galvanized steel
- Stainless steel clamp - 6.3mm x 900mm
Installation steps for inclined flagpoles
- Measure the circumference of the post.
- Cut the band (the stainless steel collar) by increasing the length by about half the circumference of the post.
- Pass the clamp through the mounting holes in the bracket.
- Place the clamp on the collar and bend it at a 180° angle.
- Fix the flag support to the pole or lamp post, tighten the clamps with the clamping pieces inserted in the mounting brackets and tighten the nuts with a wrench. After mounting the flag-holder bracket, the flagpoles are attached to the brackets and secured with screws.
- Screwdriver wrench (additional accessory)
Other products
Inflatable structures
Need a quote? Would you like to know more about our services? Please take the time to write to us …