Inflatable arch - angled shape

Leading the inflatables industry for nearly 10 years, we’ve developed a reputation for selling high-quality inflatable products, excellent after sale services, and the ability to make your concept a reality.
Inflatable arches are advertising products, which use a permanent internal blower to reach and hold their full size. These arches are easy to set up, take down and transport.
Inflatable arches can be placed at the starting or finish line of a race or anywhere in between. Outside of racing events, inflatable arches can be placed in any place where you want to advertise. In places with heavy foot traffic.

Inflatable arches are advertising products, which use a permanent internal blower ^* to reach and hold their full size. The internal air blower is a key component of your inflatable arch. It’s important to keep it clean and dry to increase its lifespan. These inflatable arches are developed by skilled professionals using advance technology and quality raw material.

Advantages

lightweight and quick to install
easy to clean and to keep clean
large advertising surface, full colour printing on the whole surface
accessories included: carrying bag, pegs and ropes for fixing on the soft ground
possibility of installing of internal LED lighting
possibility to install Velcro on the arch for replace the graphics

Sizes of inflatable arches - angled shape

internal dimensions: 5 x 3 m
external dimensions: 7,4 x 4,2 m
diameter of leg: Φ 1,2 m

internal dimensions: 6 x 4 m
external dimensions: 8,5 x 5,3 diameter of leg: Φ 1,23 m

internal dimensions: 8 x 4 m
external dimensions: 10,6 x 5,3 m
diameter of leg: Φ 1,3 m

internal dimensions: 10 x 5 m
external dimensions: 13 x 6,6 m
diameter of leg: Φ 1,48 m

Dimensions of inflatable arches ( angled shape )
Inside dimensions [m]	Outside dimensions [m]	Diameter of the leg [m]
5 x 3	7,4 x 4,2	1,2
6 x 4	8,46 x 5,3	1,23
8 x 4	10,6 x 5,3	1,3
10 x 5	12,96 x 6,6	1,48

Options for inflatable arch

Available options for inflatable arches

With the legs, there are also a few options available for the inflatable arches. We have the standard single pole leg. Then a more complex “T-shape” leg that helps add stability.
As an option, each arch can be ordered with T-shape feet for additional stability. The T shaped section of each leg can be fully branded exactly like the main body of the inflatable arch. Regardless of leg choice, you still need to secure / rope the arch down.

We also offer the manufacture of inflatable arches with 3D elements. For a specific project, do not hesitate to contact us by phone or email.

Installing inflatable arch with integrated permanent blower

Before setting up, ensure that the place where you want to install the arch is clean.

Take the arch out of the bag and spread it out completely on the space provided
Make sure that the leg in which the blower is integrated is closest to the power source
Pull the cable out of the air outlet opening and then close all zips of the inflatable arch
After the cable has been connected to the socket, the arch is inflated by the permanent internal blower
If the inflatable arch is filled with air, you can set up the position. For this, at least 2 people should tackle it. By pulling and pushing, the inflatable arch is now brought into the upright position
Tension the ropes with the pegs to the floor

Fully Customisable Printing

The custom inflatable arches can be fully printed, from some basic logos to some velcro banners. This means we can particularize your inflatable arch and draw a massive amount of attention to your event.