Inflatable arch - squared shape

This inflatable arch is a perfect way to get your brand noticed at any outdoor event. The inflatable arch is easy to set up and inflates within minutes. Print your logo and colours on the inflatable arch, and your brand instantly becomes the focal point at any special event like marathons, cycle and running races, etc.
FlagLand design team can print artwork directly on the sides of an inflatable arch, or we also offer a second option; removable Velcro top and side panels. This simple, cost-effective option with Velcro allows you to rebrand your inflatable arch for future events.
The inflatable arches are extremely popular at sports events and can be used at grand openings, event promotions, entrances to events, brand launches, trade shows or retail displays.

Inflatable arches are advertising products, which use a permanent internal blower ^* to reach and hold their full size. The internal air blower is a key component of your inflatable arch. It’s important to keep it clean and dry to increase its lifespan. Inflatable arches start-finish are the most effective form of advertising during outdoor events or sport events and others.

Advantages

Suitable for indoor and outdoor use
Easy to assembly and transport
Vibrant colour combination
Option of adding 3D elements
Option to install Velcro on the arch for replace the graphics
Cost-effective for advertisement

Sizes of inflatable arches - squared shape

internal dimensions: 5 x 3 m
external dimensions: 7,4 x 4,2 m
diameter of leg: Φ 1,2 m

internal dimensions: 6 x 4 m
external dimensions: 8,5 x 5,3 diameter of leg: Φ 1,23 m

internal dimensions: 8 x 4 m
external dimensions: 10,6 x 5,3 m
diameter of leg: Φ 1,3 m

internal dimensions: 10 x 5 m
external dimensions: 13 x 6,6 m
diameter of leg: Φ 1,48 m

Dimensions of inflatable arches ( squared shape )
Inside dimensions [m]	Outside dimensions [m]	Diameter of the leg [m]
5 x 3	7,4 x 4,2	1,2
6 x 4	8,46 x 5,3	1,23
8 x 4	10,6 x 5,3	1,3
10 x 5	12,96 x 6,6	1,48

Options for inflatable arch

Available options for inflatable arches

With the legs, there are also a few options available for the inflatable arches. We have the standard single pole leg. Then a more complex “T-shape” leg that helps add stability.
As an option, each arch can be ordered with T-shape feet for additional stability. The T shaped section of each leg can be fully branded exactly like the main body of the inflatable arch. Regardless of leg choice, you still need to secure / rope the arch down.

We also offer the manufacture of inflatable arches with 3D elements. For a specific project, do not hesitate to contact us by phone or email.

Installing inflatable arch with integrated permanent blower

Before setting up, ensure that the place where you want to install the arch is clean.

Take the arch out of the bag and spread it out completely on the space provided
Make sure that the leg in which the blower is integrated is closest to the power source
Pull the cable out of the air outlet opening and then close all zips of the inflatable arch
After the cable has been connected to the socket, the arch is inflated by the permanent internal blower
If the inflatable arch is filled with air, you can set up the position. For this, at least 2 people should tackle it. By pulling and pushing, the inflatable arch is now brought into the upright position
Tension the ropes with the pegs to the floor

Fully Customisable Printing

The custom inflatable arches can be fully printed, from some basic logos to some velcro banners. This means we can particularize your inflatable arch and draw a massive amount of attention to your event.